ENGLISH
Dehydrated vegetables
Taizhou Hongxin Food Co., Ltd.
The QD350 fruit and vegetable dicing machine
Date:2012-3-7 Hits:1570 
The QD350 fruit and vegetable dicing machine

I. Introduction
This three-Wei Qieding machine on the basis of foreign advanced models, combined with the user's urgent need of improved design is made. Propeller impeller diameter similar diced models, by the Ф300 changed Ф350mm, cut the material effective export wide by 90 changed to 100mm, speed increased by nearly three times. Promote and hub, cutter, knife blocks, turret assembly, etc. are made of stainless steel, with a reasonable design, cut varieties, good quality, continuous operation, suitable for uninterrupted production, easy to clean and maintain chip-shaped cut carrots, potatoes, onions, green peppers, fruit, potato bulbs class materials in the food industry, wire-shaped, block D shape of the product.
Second, the technical parameters
A propeller diameter: Ф350mm
2, motor the: Y112M-4 4KW
3, the output 1000-3000kg / h
4, Weight: 350kg
Dimensions: 1100 × 1100 × 1600mm
Third, cut the material specifications
    Use of the cutter shaft, and adjust the thickness of the slice, you can cut a variety of films, or D-shaped.
1, to unload the disc cutter shaft feeder axis, as amended, tool axis can cut piece of 2-11mm shaped.
2, lifted the knife shaft, with the disc cutter shaft (send feeder axis) 3,3.5,4,5,6,7,8,10,12 any combination, can be sliced, silk, the small block-shaped.
3, the normal cut: 3 × 3 × 3,3.5 × 3.5 × 3.5,4 × 4 × 4,5 × 5 × 5,6 × 6 × 6
7 × 7 × 7,8 × 8 × 8, 10 × 10 × 10, 12 × 12 × 12
D shape can be cut: 3 × 3 × (2-11)
3.5 × 3.5 × (2-11)
4 × 4 × (2-11)
5 × 5 × (2-11) according to the tool combination can be cut to a thickness not
6 × 6 × (2-11) are box-shaped, rectangular strip
7 × 7 × (2-11) for 15,20,25,30
8 × 8 × (2-11) or free length
10 × 10 × (2-11)
12 × 12 × (2-11)
Attachment: normal random supply of 5 × 5,10 × 10 two kinds of tools, to increase the specifications must be ordered separately tool.
Instructions and precautions
1, the factory of the machine contains a sharp cutter blunt grinding stay sharp.
Rotating parts and high-voltage power supplies, maintenance equipment, disconnect and lock the power supply, and visually confirm that the equipment has been completely stopped, before they are allowed to remove the cover and fenders.
3, pay attention to daily cleaning, to prevent excessive accumulation on the cutting parts, affect the cutting efficiency. Cleaning, matte material may not be used, metal tools, iron brush and sandpaper to clean any parts, if necessary, a spatula with a wooden or plastic tools.
4, boot device, you must get the upper hand plate timing belt pulleys, to ensure that no foreign body in the slicing device power before they start.
5, after the equipment to run 4 hours, the device must be lubricated.